Tube-tech Hlt2a | Stereo Tube Eq With High / Low Shelving Eq With Tilt Function

3.299,00 € MPC: 3.585,87 € (-8%)
Dobavljivo po naročilu Na zalogi v:
Dodaj na seznam želja Obvesti me, ko bo izdelek na voljo

Stereo Tube EQ with Low- and High-frequency Shelving, High- and Lowpass Filters, and T-filter Midrange "Tilt" EQ

0 ocen

Ste kupili ta izdelek?
Napišite nam svoje mnenje.

OPIS IZDELKA

The Tube-Tech HLT-2A upends the traditional EQ paradigm, combining low- and high-frequency shelving plus high- and lowpass filters with the ingenious T-filter midrange "tilt" EQ in a revolutionary stereo tube equalizer. Tube-Tech's innovative T-Filter "tilts" the entire sonic spectrum around a selectable midrange frequency. Above that point, frequencies increase (or decrease) while frequencies below that point decrease (or increase). Engineers find this a powerful and highly efficient way to quickly zero-in on gorgeous-sounding overall EQ. Perfect for individual tracks, stems, or strapped across the drum or mix bus, the Tube-Tech HLT-2A is an ideal go-to EQ for project studios, high-end mastering suites, and everything in between.

Beautiful broad-stroke equalization

If you need to zap an obstreperous frequency without causing collateral damage, the HLT-2A is not the right tool. But if you have use for a broad-brushstroke EQ that imparts sonic beauty to everything you feed it, the HLT-2A will serve you well. It works wonders strapped across your stereo mix bus, but its unique features also make it indispensable during tracking. It breathes life, warmth, and personality into a signal and gives it palpable dimension within your mix.

Instant sonic gratification

The HLT-2A is a stereo EQ featuring active high and low shelving, a passive T-filter, and passive high- and lowpass filters. The shelving EQs are designed around a high-gain tube amplifier, while the T-filter and low/high-cuts are passive filters positioned before the output amplifier, after the active shelving EQ. The T-filter works intuitively, like a seesaw: with a clockwise turn of the pot, the high end goes up and the low end goes down — and visa versa. Tube-Tech has provided a bypass switch for each section, plus an overall bypass switch that eliminates all filters from the circuit but leaves the output stage in; so you can warm up a signal without EQing it, should you so desire. In operation, the HLT-2A is a joy to use, mainly due to the speed with which you can obtain sonic gratification. Put one in your rack — you will be amazed and delighted.

Features:

  • All-tube active/passive stereo equalizer
  • ±12dB of active low- and high-frequency shelving
  • Low shelving selectable at: 18, 37, 80, 180, 370, and 800Hz
  • High shelving selectable at: 1, 2, 5, 10, 15, and 22kHz
  • Passive high- and lowpass filters with 6dB/octave slope
  • Highpass selectable at: 18, 25, 40, 60, and 85Hz
  • Lowpass selectable at: 12, 15, 18, 20, and 25kHz
  • Ingenious T-filter midrange "tilt" EQ (+4/-7dB, -7/+4dB)
  • T-filter selectable at: 500Hz, 1kHz, and 2kHz
  • Master Bypass switches entire filter section out of the amplifier circuit but leaves the output stage in
  • All tube-based, except for power supply
  • Tube-based push-pull amplifier
  • Fully floating transformers for input and output
  • All DC voltages stabilized, except output-stage anode voltage
  • Frequency response: 5Hz - 55kHz (-3dB)
  • Input impedance: >10k ohms
  • Output impedance: < 60 ohms
  • Low noise performance: < -80dBU @ 0dB gain
  • CMRR: > 60dB @ 10kHz
  • Inter-channel tracking: ±.3dB

S pritiskom gumba “Potrdite”
se obvežete za nakup artikla, če bo vaša ponudba najvišja.

Izdelek:
Aktualna ponudba:
Vaša ponudba:

V primeru, da odstopite od nakupa, ima Audio Pro d.o.o. pravico izterjave sredstev od kupca (po potrebi tudi po sodni poti).

Komentarji kupca

Izdelek je dodan v košarico

Količina: