Schertler UNICO
UNICO is unique - the perfect amp to reproduce the sound of any acoustic instrument or voice. Every one of its components, from preamplifiers to loudspeakers, has been designed for natural and accurate response. UNICO’s circuitry is designed like the circuits found in professional-quality recording studio electronics - you will hear the difference in accuracy and precision when compared to other acoustic combo amplifiers.
New features include variable input gain control (Trim Pot) and additional EQ control on each channel, redesigned cabinet dimensions for improved bass response, and an improved tweeter for an even clearer high end.
NICO has a built-in analog spring reverb designed using an innovative Class A circuit producing the smooth and musical reverb sound guitarists, violin players and others have been seeking. UNICO’s rich reverb is a sound more often found in the concert hall than in the inexpensive digital effects processors of many acoustic amplifiers.
Three inputs provide the flexibility performers have been asking for.
- MIC IN: input for dynamic or condenser microphones, including switchable 48v phantom power.
- DYN IN: an input optimized for connecting microphones or other electrodynamic transducers having low impedance and low level. Perfect for Schertler DYN-Series electrodynamic transducers. Includes 10v switchable phantom power which allows the connection of electret condenser microphones such as the Schertler BLUESTiCK Marine System. Resonance control effective at 180Hz.
- STAT IN: a medium impedance input with optimal sensitivity for high-level audio signals like the Schertler BLUESTiCK undersaddle acoustic guitar pickup, active electric bass and guitars, and similar devices. Includes 10v switchable phantom power which allows the connection of the Schertler STAT-Series electrostatic transducers and BLUESTiCK Marine system.
Each UNICO channel includes the following:
- Equalization, from high to low, allowing a wide range of tonal variations to be explored. DYN IN includes a resonance control effecting a notch cut at 180 Hz.
- Analog spring reverb level. The classic sound of spring reverb adds warmth and depth to any instrument.
- Channel volume control.
UNICO’s MASTER SECTION includes:
- DI OUT: balanced output of the master signal for recording or live sound reinforcement - LINE OUT: unbalanced output of the master signal. This Signal is controlled by the master volume and may be used to drive active speakers such as the Schertler PUB 2/280 or bass extension PUB 1/380 (low cut engaged).
- AUX OUT: similar to the line out, but regulated separately by the AUX volume. For recording or monitoring.
- INSERT: a 1” stereo jack used to connect the input and output of outboard signal processors or effects such as equalizers or compressors. Also used for the optional Schertler UNI-Pedal to control the master volume.
- LOW CUT: cuts frequencies below 150 Hz to use the UNICO with an active sub-woofer such as the Schertler PUB 1/380. When the LOW CUT is engaged, UNICO delivers mid and high frequencies while the bass extension transmits the low end.
- MASTER REVERB: Controls the overall system reverb level.
- MASTER VOLUME: Controls the overall system volume level.
COMPONENTS:
- 8” Woofer
- 1” Dome Tweeter
- 150w + 35w RMS, bi-amplified
VOLTAGE SUPPLY:
UNICO can be used in combination with many other SCHERTLER products and accessories, such as:
SCHERTLER PUB
- Schertler PUB/280: active bi-amplified system. 220 Watts RMS + 80 Watts RMS bipolar amplifiers, traditional heavy power-supplies for highest sound reproduction quality.
- Schertler PUB/380: active bass extension. 450 Watts RMS drives a 10” woofer. The result is clear, dry and extremely controlled lower frequencies (linear down to 40 Hz).
SCHERTLER ELECTRODYNAMIC TRANSDUCERS
- All Schertler DYN-Series transducers can be connected to the DYN IN Channel. Schertler offers this top quality contact microphone for guitar, mandolin, cello, double bass, violin and viola, harp, piano and grand piano, ethnic instruments, etc.
SCHERTLER ELECTROSTATIC TRANSDUCERS
- All Schertler STAT-Series transducers can be connected to the STAT IN Channel without using the original-equipment preamp. 10v phantom power is provided at the input. The STAT-Series includes the STAT-B for double bass, the STAT-C for cello and the STAT-V for violin and viola.
SCHERTLER BLUESTiCK® TRANSDUCERS
- UNICO has been designed with the needs of the acoustic guitarist in mind. Compatible with all Schertler BLUESTiCK under-saddle condenser microphone pickups, UNICO provides phantom power to the BLUESTiCK Marine version.