Schertler A-DYN Set Acoustic Instrument Pickup with Pre Amp
|
The A-DYN is a low impedance transducer that can be connected to any mixing board in a microphone input. But we advise you to use it with the A-PRE preamplifier. Using the A-DYN together with the A-PR you have possibility to research the desired sound with the help of the ROLL-OFF filter, a 3 step gain. If you have feedback problems try to use the phase switch to remove it.
The low impedance, A-Class electronics guaranty a hi quality signal as a professional audio level.
For the correct positioning of the A-DYN consult the usermanual on page 8.
The A-DYN-SET is composed by the A-DYN, A-PRE, grean Putty container, cable holders and the A-PRE floor support.
The A-DYN is recommended for all acoustic instruments
A-DYN MANUAL:
DOWNLOAD
|
|
A-DYN SPECIFICATIONS
|
|
MECHANICAL DECOUPLING
|
Butterworth 2nd order, Q=0.6
|
|
NOMINAL IMPEDANCE
|
440 Ohm
|
|
FREQUENCY RESPONSE
|
20Hz to 18'000Hz +/- 3dB
|
|
DYNAMIC RANGE
|
139dB, 145dB Typical
|
|
SENSITIVITY
|
8mV/g
|
|
SENSITIVITY (on instrument)
|
ca. -38dBu
|
|
TEMPERATURE RANGE
|
-20°C to +70°C
|
|
CONTACTS
|
all hard gold 0.5um plated
|
|
CONNECTION
|
XLR, Balanced (2 m)
|
|
0dBu <=> 0.775V
|
|
A-PRE SPECIFICATIONS
|
|
FREQUENCY RESPONSE
|
16Hz to 50'000 Hz (+/- 3dB)
|
|
MAX INPUT
|
+0dBu
|
|
MAX OUTPUT
|
+4dBu
|
|
GAIN
|
3 positions +0dB / +8dB / +16dB
|
|
THD (total harmonic distortion)
|
0.005% at 1KHz, 0.2Vrms
|
|
ROLL OFF FILTER
|
3 positions - 0Hz (flat) / 100Hz / 200 Hz
|
|
OUTPUT IMPEDANCE
|
180 ohm
|
|
VOLTAGE DC
|
min - 24V
|
|
0dBu <=> 0.775V
|