The Peluso CEMC-6 is a solid-state small diaphragm condenser microphone. The CEMC-6 ships with a fixed cardioid pattern capsule with a 20mm gold sputtered diaphragm. The capsule is easily swapped with additional capsules (not included) that provide omni-directional, cardioid, wide cardioid or hyper-cardioid patterns. The CECM-6 features a 10 dB and 20dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This is a very versatile microphone used in the studio for vocals and acoustic instruments to drum overheads. For the remote recorder this is a great mic for orchestras and live audience tapers. You'll always get great results from one of the most versatile, best sounding small diaphragm mics on the market.
Additional capsules with omni-directional, cardioid, wide cardioid and hyper-cardioid patterns available.
Acoustically matched pairs available with our Stereo Kit.
The single CEMC-6 ships with a hard mount. The Peluso small diameter shock mount is available separately.
Power Requirements: Important - This unit requires phantom power at 48 volts, +/- 4 volts. Each unit has been thoroughly checked before shipping, so if you hear no sound, check the cables, and that the phantom power on your mixer or separate power supply is switched on.
Specifications:
Type: condenser pressure gradient w/ 20mm capsule
Frequency Range: 19Hz/25kHz
Polar Pattern: cardioid w/ removable capsule
Sensitivity: 10 mv/pa
Impedance: 200 ohms
SPL: 156 dB w/ 20dB pad switch engaged
Equivalent Noise: 14 dB(A)
Power Requirements: phantom - 48v ± 4v
Current Consumption: < 3.0 MA
Size: 22mm x 164mm
Weight: 134