The Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The Groundlift switch has a "lift" position allowing adjustments between a "soft and hard grounding" . The balanced output is achieved with a high quality transformer in the Mumetall housingthat was specially developed for this purpose. The PAN02 Pro can be powered either with a 9 V battery or 48 V phantom power. A two-colour LED indicates which source supplies the power.
Specifications
| Product type: |
DI box |
| Type: |
active |
| Channels: |
1 |
| Inputs: |
2 |
| Input connectors: |
XLR, 6.3 mm Jack |
| Max. input level: |
+ 45 dBu |
| Input impedance: |
-10 & -20 dB: 70 k, -30 dB: 40 k, 0dB & 12 dB: 1 M Ohm(s) |
| Input pad: |
0 dB, -10 dB, -20 dB, -30 dB |
| Outputs: |
1 |
| THRU outputs/channel: |
1 |
| Output connectors: |
XLR, 6.3 mm Jack |
| Max. output level: |
+ 20 dBu |
| Output impedance: |
600 Ohm(s) |
| Frequency response: |
20 - 20000 Hz |
| Transformer balanced: |
yes |
| Ratio: |
3.16:1, 10:1, 31.6:1, 1:4 |
| Controls: |
attenuator, battery/+ 48 V Power, Boost, ground lift |
| Operating voltage: |
9 V block, +48 V phantom power |
| Cabinet material: |
sheet steel |
| Cabinet surface: |
powder coated |
| Width: |
116 mm |
| Depth: |
140 mm |
| Height: |
43.5 mm |
| Weight: |
0.85 kg |