Neets Control WueBec
- World's most straight forward projector control system
- Easy programming by supplied Windows configuration software
- Can be mounted anywhere
- No buttons
- Perfect for classroom and small meeting room
|
RS-232 |
IR |
LAN |
I/O |
Keyboard |
Buttons |
| |
| |
| |
|
1 |
1 |
n/a |
3 (2 out - 1 in) |
n/a |
n/a |
Neets Control - QueBec is an intuitive and straight forward projector control system. All you need to do is plug the Neets Control - QueBec to the stationary computer, turn the computer on and the projector will start. You are ready for your presentation within minutes.
Retrofit your installation with Neets Control QueBec
|
The Neets Control - QueBec is unique in its layout. Unlike the other control systems in Neets product portfolio, the Neets Control - QueBec has no buttons. The system starts automatically when starting the computer.
The system is perfect for a straight forward project where all you need is to control a projector and a screen. The typical project for a class room or smaller meeting room.
Nothing can go wrong! The end user will only have to operate the computer. The system does not control volume up/down or any other source but the source from the PC. If the end user needs to mute the projector, the Neets Control - QueBec has an input which can be used for an external key that can mute the system. |
It is absolutely not a problem to mount the Neets Control - QueBec. Because the system is small and has no buttons for the end user to operate, the system can be mounted almost anywhere - for example over a lowered ceiling.
Like all Neets products, the Neets Control - QueBec is intelligent but at the same time intuitive to use. The system is easily programmed with the Neets configuration utility software.
Highlights/Functions:
- Starts up the projector
- Easy programming by Windows software
- Fool safe (The user cannot do anything wrong)
- Intelligent power on and off function
- No buttons
- Input for external key (AV mute or off)
Room functions (*):
- Screen up/down
- Dark room curtains open/shut
(*) Room control functions must use Neets Relay Interface box. See Switching Control
Technical specifications:
Dimensions:
H: 25mm, W: 125mm, D: 70mm
1 RS-232 (+/- 6V, 1200-115200Baud)
1 IR (1 Emitter)
1 In (Sence low < 1VDC, Sence high > 4VDC)
2 Out (Open drain 24V/500mA)
VGA loop thru (Max resulution 1366x768.)
Supply voltage: 230 Volt
Current use: 0,4W max
Control type: RS-232 and IR
Cable length: 40m. max (From controller to projector - depending on environmental conditions)