The Lewitt LCT 441 FLEX is a 1" true condenser microphone features eight types of directionality to choose from, including three reverse polar patterns that give you higher flexibility and invite to experiment. Comes with shock mount, windscreen, and pop filter.
A polar pattern affects how much room sound you end up recording. But switching your polar pattern not only changes the directivity but also alters the frequency response, resulting in a different sound coming from the same microphone. You can also control the proximity effect and have it pronounced or reduced according to your application. This can serve as another sound-shaping tool.
Use the LCT 441 FLEX to record your vocals, acoustic instruments, guitar amplifiers, drums, percussion, and everything else. Do not hesitate to change your perspective by experimenting with different directivities. Its natural transient response and high dynamic range make sure that nothing will limit your performance on the technical side. Every session with the LCT 441 FLEX will result in vibrant and lively recordings.
Reduce unwanted structure-borne noise efficiently using the included shock mount. The magnetic pop filter hides nothing but captures everything but plosives and hisses. It perfectly integrates with the design of the microphone. LCT 441 FLEX in shock mount.
Specifications:
- Type: Condenser, externally polarized
- Acoustical operating principle: Pressure gradient transducer
- Diaphragm: 3 micron gold sputtered Mylar
- Transducer fi: 25.4 mm, 1 in
- Polar pattern: Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid
- Sensitivity: 17.2 mV/Pa, -35.3 dBV/Pa
- Equivalent noise level: 7 dB (A), cardioid
- Max SPL for 0.5 % THD: 144 dB SPL
- Signal/noise ratio: 87 dB (A)
- Dynamic range: 137 dB (A)
- Supply voltage: 48 V ± 4 V
- Current consumption: 4 mA
- Internal impedance: 54 Ohm
- Rated load impedance: 1000 Ohm
- Connector: Gold plated 3-pin XLR
- Mic enclosure: Zinc die cast