Kv2 Audio Sl 2.15 | Double 15" Direct Radiation Subwoofer System

SL Series

The new SL412 and SL2.15 speakers incorporate an eye catching slim stylish cabinet design. Designed to integrate either externally through simple wall mounting, suspension, ground stacking, or internally into walls and surfaces, these units can be designed and supplied with custom colors, grill templates and logos, offering a flexible and true designer integrated product. A single yoke assembly with multiple fixed angle and fixing locations, provides a quick and cost effective solution for simple suspension options.

Using KV2 VHD technology, the SL412 loudspeaker utilizes 4 x 12” low mid-range components and the proven and highly respected horn assembly from the VHD1.0, with a single 8” mid-range and 3” large format NPVD compression driver. This mid-high horn has an extremely coherent-wide horizontal dispersion of over 110° while the purpose designed 4 x 12” configuration dramatically reduces the most common problem of immediate reflections within the 300 to 800Hz range usually associated with wide dispersion loudspeakers.

The end result is full and wide sound propagation exactly where it is required. While the SL412 can be utilized with any of KV2’s wide range of sub woofer systems depending on the actual application, the accompanying SL2.15 utilizes the same slim line design to allow for an aesthetically pleasing and acoustically punchy system that can virtually disappear against a wall. The SL2.15 is a 2 x 15” specially designed to output maximum bass response from a its shallow cabinet design. To achieve deep low bass extension it is recommended to use the SL 2.15 with KV2 18” or 21” subwoofers.

SL2.15 - SL Bass Enclosure

The SL2.15 is a double 15" direct radiation subwoofer system with augmented bass reflex. Built to integrate aesthetically with the SL412 the SL2.15 produces deep bass from its slim cabinet design. Bass response is enhanced by coupling when the SL2.15 is used against or in a wall, providing optimum output for it’s small footprint. It also combines beautifully with the Ultra Low Frequency VHD1.21 and 2.21 subwoofers as part of a five way active system.

• Slim, discreetly profiled wall mount cabinet
• 129dB sustained output, 132dB peak with very high dynamic range
• Simple wall mounting, suspension and ground stacking options and can be installed internally into walls and surfaces
• These units can be designed and supplied with custom colors, grill templates and logos, offering a flexible and truly designer integrated product
• A single horizontal yoke assembly with multiple fixed angles and fixing locations, provides a quick and cost effective solution for simple suspension
• Front-loaded, 2x 15" bass drivers with 3" voice coil assembly and ferrite magnetic motor structure
• Professional, exterior-grade Baltic birch construction with wear-resistant polymer coating
• Proprietary side handle design for simplified handling and carrying
• Internal back braces with nine M10 suspension points
• A total of 23 suspension points are available for custom installation applications
• Two SL2.15 speakers require one channel of two channel VHD3200 subwoofer amplifier unit
• The SL412i & SL2.15i are identical in performance and finish as the existing SL412 & SL2.15, except they do not incorporate the fixed handles for touring and presentation use. The ‘I’ version is designed for fixed installation use with the same existing mounting and flyware fixings