FBT MITUS 206LA Line Array Powered Speaker 600W + 300W - FTB Code - 31708
FBT MITUS 206LA speaker features lightweight, yet rugged gas injected molded polypropilene cabinet construction. The FBT MITUS 206LA is a two-way design incorporating 2 x 6.5” B&C neodymium woofers with1.7” voice coil and 1.4” exit B and C neodymium driver with 2.5dia voice coil. The modularity of the FBT MITUS 206LA makes it extremely flexible for a wide range of applications, from a small 2 cabinet P.A. system to an elaborate line array system consisting of up to 12 MITUS 206LAcabinets along with multiple FBT MITUS 212FSA subs for large concert events. The FBT MITUS 206LA shall meet the following performance criteria: Frequency response of 68Hz to 20kHz, Maximum SPLof 134dB, classDamplifier module that provides 600WRMSto the LF and 300WRMSto the HF. The waveguide, optimized byBEMfinite element simulation, offers 100° horizontal dispersion; engineered to be perfectly integrated with the HF compression driver it allows the dispersion of a flat acoustic wave to over 18kHz. The MITUS 206LA cabinets coupling hardware is internally integrated and allows the suspension of 12 arrays with a 10:1 safety factor. The front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers. The FBTMITUS 206LA provides a wide range of hardware accessories for flying and ground stacked configurations.
Permanent installations in:Theatres, Concert Halls, Clubs, Places of Worship,Conference Rooms, Indoor Sports,Arenas and Stadiums Sound reinforcement for live events:Touring, Bands, Orchestras
- High impact polypropylene gas-injected enclosure
- ClassDamplifiers, 600WRMSto the LF, 300WRMSto the HF
- 2 x 6.5”B&Cneodymium woofers with 1.7" coil
- 1.4" exitB&Cneodymium driver with 2.5"coil
- DSPon board with 8 preset
- 100° horizontal waveguide
- Input panel with XLR in and link, volume, preset, HF level,HPfilter,GNDlift switch
- High SPLcapability: 134dB
- Integrated rigging hardware
- Very lightweight: 14kg
- Completely Manufactured in Italy
- Configuration way way 2
- Built-in amplifier cont. rms LF/HF W 400/200
- Built-in amplifier max. rms LF/HF W 600/300
- Built-in amplifier max. peak LF/HF W 1200/600
- Frequency response @-6dB 68Hz - 20KHz
- Low frequency woofer inch 2x6.5 - 1.7 coil - neodymium
- High frequency driver inch 1 x 1.4 - 2.5 coil -neodymium
- Maximum SPL cont/peak dB 125 / 134
- Dispersion H x V 100° x 10° max dependant upon n° of element
- Input impedance kOhm 22
- Crossover frequency kHz 1,2
- AC Power requirements VA 640
- Input connectors XLR with loop
- Power cord m 5