The R300-E system includes the metal BP-300 bodypack transmitter, which uses two AA batteries. The HM3 microphone is comfortable for extensive daily use, including long presentations. Using a headwork microphone helps to control audio feedback and provides consistent audio while the speaker moves naturally around the stage. Visit the R300 microsite
Features
- ClearScan automatically finds the clearest channel
- EZsync one-step channel setup
- HM3 omni-directional microphone
- 14 hour battery life from two AA alkaline
- Rugged metal transmitter
- Metal receiver chassis with optional rack mount
Specifications
| Antennas |
Flexible TNC 1/2 Wave |
| Audio Frequency Response |
80 Hz - 18kHz +/-2dB |
| Balanced Line Level Output (RMS Adjustable) |
10 - 100 mV |
| Battery Life |
14 hours with (2) AA alkaline typical |
| Case Material |
metal |
| Connector Type |
1/4 inch unbalanced, 3-pin XLR balanced |
| Controls |
on/off, Set, Up, Down, Sync |
| Distortion (@ 1 kHz, 40 kHz deviation) |
Less than 1.0, 0.4 typical % |
| Diversity |
True Antenna |
| Dynamic Range |
greater than 95 dB |
| Element |
HM-3 Omni-directional headworn |
| Number of Channels |
32 per band, 8 Simultaneous |
| Operating Temperature Range |
5? - 45? C (41? - 113? F) |
| Power Requirement |
12-16 VDC, 500 mA max |
| Power Supply |
12 VDC, 500mA max |
| Receiver Type |
Synthesized PLL |
| RF Frequency Range |
16 MHz |
| RF Output |
8 mW typical |
| RF Sensitivity (12 dB SINAD) |
less than 1.0 uV |
| Signal-to-Noise Ratio (A-weighted) |
greater than 100 dB |
| Squelch |
Tone code plus Amplitude |