The eNode 8 PRO is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet protocols. All 8 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the front are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode 8 PRO embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial.
Connections:
2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)
Features:
DMX routing, universe setting
Input and output enable / disable
DMX output frame rate setting
Supported protocols: DMX, DMX512-A, RDM, Art-Net™
Protocol selection per port
IP settings
Unit ID and labeling
Ethernet activity indication on front panel
Multi language support?
Operation:
Ethernet <-> DMX conversion
Ethernet and DMX Merger
Ethernet and DMX Backup
DMX splitter / booster
DMX trigger. Remote selection of the control source
Built-in DMX soft-patch
Size / Weight:
Length: 482mm
Width: 160mm
Vertical Height: 44mm
Weight: 2.1kg
Electrical / Thermal:
AC 100-240V - 50/60Hz
7W Max Power Consumption
2°C to 45°C