The Dynaudio BM6A Active Nearfield Speaker - single. Powerful near-field in compact package, can be employed to cover every aspect of sound engineering and reproduction.
The Dynaudio BM6A monitor can be employed to cover every aspect of sound engineering and reproduction, including music and speech monitoring and mixing, radio station, OB vehicles, edit suites, post production, recording studios and playback rooms. Their small size combined with their brilliant performance also make them suitable for use as rear channel speakers in surround systems. In combination with the BM 14S the BM6A is also well suited for a full-blown 5.1 system in smaller rooms. The BM 6A features an electronic 4th order phase-aligned crossover with a crossover point at 2.2kHz, which feeds two high performance discrete MOSFET amplifiers rated at 100W each. The low frequency section is driven by a low frequency equalizer offering a choice between extended, critical damped response or more conventional higher Qt response for more level but less low frequency output. Included in the electronics is a complex protection circuit, which helps to prevent accidental damage to the drivers, yet still providing maximum transient response. The BM 6A is housed with an elegant matte cabinet with radius edged construction on the front baffle to reduce boundary effects and improve overall sound quality.
The main features of the Dynaudio BM6A include:
- Powerful near-field in compact package, can be employed to cover every aspect of sound engineering and reproduction
- Dual 100 watt Mosfet power amplifiers with photo active High Frequency clip protection and overload indicators, DC and thermal protection on both channels
- ESOTEC 28mm soft dome tweeter as used in M series
- 170mm magnesium silicate impregnated polypropylene bass driver with exceptionally large 75mm aluminium voice coil
- Variable LF equalisation and HF trim controls
- Frequency Response (+/- 3 dB): 41 Hz - 21 kHz
- Max SPL 1m, pair (IEC Short Term): 118 dB peak
- Max SPL 2m, 5.1 (IEC Short Term): 119.5 dB peak
- Input level for 85 dB SPL 1m (+4/-10): -12 dBu RMS / -28 dBu RMS
- Input level for max peak SPL (+4/-10): +16 dBu peak / -1 dBu peak
- XLR connectors, fully balanced input
- Power consumption Idle: 25 W / Max: 200 W
- Amplifier power: Tweeter: 100 W / Woofer: 100 W
- Resonance Frequency: 49 Hz
- Internal Cabinet Volume: 9.5 liters
- Bass Principle: Bass reflex.
- Crossover Frequencies: 2200 Hz
- Crossover Slope: 24 dB/oct
- Tweeter: Esotec 28 mm/1.1 inch soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front, Pure alu wire voice coil
- Woofer: 17 cm, 75 mm pure alu wire voice coil, One piece molded polypropylene cone
- Weight: 11 kg
- Dimensions (W x H x L) 217 x 338 x 321 mm
- Price displayed is for a single boxed Dynaudio BM6A monitor