• 544838_800

Audio Technica At8033 | Cardoid Condenser Microphone

185,00 € MPC: 210,23 € (-12%)
Dobavljivo po naročilu Na zalogi v:
Dodaj na seznam želja Obvesti me, ko bo izdelek na voljo

0 ocen

Ste kupili ta izdelek?
Napišite nam svoje mnenje.

OPIS IZDELKA

AT8033 Cardioid Condenser Microphone
  • Ideal for handheld interviews and general audio acquisition
  • Excels in both studio and stage applications
  • Outstanding linearity both on- and off-axis
  • Features high SPL capability and wide frequency response
  • Operates on battery or phantom power

Ideal for general audio acquisition such as interviews, acoustic guitar, percussion, overheads, vocals and more, the AT8033 features high-SPL capability and wide frequency response. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic excels in both studio and stage applications. It operates on battery or phantom power.

  • All-purpose condenser microphone ideal for handheld interviews and general audio acquisition
  • Excels in both studio and stage applications
  • Outstanding linearity both on- and off-axis
  • Features high SPL capability and wide frequency response
  • Operates on battery or phantom power

Specifications

Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30 - 20.000 Hz
Open Circuit Sensitivity Phantom: -44 dB (6.3 mV) re 1V at 1 Pa ;
Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance Phantom: 250 ohms
Battery: 300 ohms
Maximum Input Sound Level Phantom: 137 dB SPL, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/Octave
Switches Flat, roll-off
Dynamic Range Phantom: 113 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 1200 hours typical (alkaline)
Weight 159 g (5.6 oz)
Dimensions 194.2 mm (7.65") long, 26.0 mm (1.02") head diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; battery; soft protective pouch

S pritiskom gumba “Potrdite”
se obvežete za nakup artikla, če bo vaša ponudba najvišja.

Izdelek:
Aktualna ponudba:
Vaša ponudba:

V primeru, da odstopite od nakupa, ima Audio Pro d.o.o. pravico izterjave sredstev od kupca (po potrebi tudi po sodni poti).

Komentarji kupca

Izdelek je dodan v košarico

Količina: