AT 2010
AudioTechnica 2010 je bil ustvarjen s ciljem ustvariti studijsko kvaliteten mikrofon za uporabo na odru, za kristalno čiste vokalne nastope. 2010 je odličen kondenzatorski mikrofon, ki ima razširjen frekvenčni razpon ter odličen soničen odziv, dinamičen razpon je v večini primerov neprimerljiv z ostalimi produkti tega razreda. Kardioiden sprejem onemogoča sprejem zvokov s strani in iz ozadja, kar izboljšuje izolacijo željenega zvočnega izvora. Izdelan je iz robustnega kovinskega ohišja. Frekvenčni razpon je od 40 Hz do 20 kHz, upornost 100 Ohm-ov, maksimalen vhodni zvočni nivo 136 dB SPL, zahtevano ˝phantom˝ napajanje 48 V, teža 233 g....
The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
- Extended frequency response and superior transient response for smooth, natural sonic characteristics
- High SPL-handling and wide dynamic range provide unmatched versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal and construction for years of trouble-free service
- Quiet-Flex stand clamp provides silent, flexible microphone positioning
Specifications
- Element: Fixed-charge back plate permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40-20,000 Hz
- Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 113 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa
- Phantom Power Requiremens: 48V DC, 2 mA typical
- Weight: 233 g (8.2 oz)
- Dimensions: 179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch