MASK 8 BLACK
The APart MASK loudspeakers have been designed for the contractor market and supply you with a crystal clear sound, from back ground music up to “dance level” music.
MASK8 has a unique and very stylish innovative design. The curved fine metal grill together with the shape of the wooden delta cabinet gives MASK8 a different, yet inconspicious look.
MASK8 has a very powerfull 8” coated papercone woofer. Together with the ferro-fluid cooled silk dome tweeter on a Waveguide horn, this results in a high SPL, an ultra low distortion and a sound that comes close to studio monitor quality!
MASK8 loudspeakers can be used as full range loudspeakers, however we advise to use them in combination with the APart subwoofers SUB-2200 and SUB-2400. Its wide frequency range makes sure every note, starting from the punchy bass over the clean middle range to the crystal clear highs, reaches your ears with an astonishing clarity.
In combination with the APart 3-channel amplifier PUBDRIVE2000 and the APart SUB2400 passive subwoofer, MASK8 turns into a very performant system solution with impressive dB-levels.
The build-in Auto-Reset 3-step Protection Guard together with the quality components make MASK8 a fail-safe loudspeaker, even at high power loads!
MASK8 is delivered with a metal U-Bracket. After mounting the bracket on the wall, the sleeve in the bracket makes it quite easy and safe to fix the MASK8 loudspeakers, even in uncomfortable positions. The MASK8 cabinet has several thread mounting points tapped at the back, the top and side of the cabinet. This way the cabinet can be rigged or mounting clamps can be used. An extra contractor advantage! MASK8-BL also has a pole mount adapter in its bottom. This adapter makes it possible to mount the speaker on top of a standard 35mm pole such as the APart STFLOOR, STSUB and STT. Please note this feature is not available on MASK8-W.
MASK8 is available in black (Ref; MASK8-BL) and white (Ref; MASK8-W). The MASK8 loudspeakers can be painted in any RAL colour as an option (Ref; PAINT-CAB8)
- Type : 2-way HiFi Pro, bass reflex
- Cabinet : MDF Wood
- Woofer : 8” HD Type
- Tweeter : 1” HD silk dome on Waveguide
- Impedance : 8 Ohm
- RMS Power 8 ohm
- AES Rated : 200 watt
- Music - Program : 300 watt
- Dynamic Peak (low-cut) : 600 watt
- Protection : Auto-Reset 3-step Protection Guard
- SPL 1 watt/1M : 93 dB
- SPL Max peak : 124 dB
- Frequency response: 60 Hz - 30 Khz
- Connector : Speakon / Speakon
- Dispersion : 80° H x 70° V
- IP rating : Indoor use only (IP40)
- Mounting points
- Back : 2
- Top / Bottom : 1 / 1
- Left / Right : 2 / 2
- Thread : M8
- Dimensions : 411 x 250 x 250 mm
- Weight : 8.1 Kg