MA200
With the MA200 mixing amplifier series, the APart engineering team has created some unique, original and above all, complete electronics. Never before has a mixer amplifier had all the features to meet a contractors demand for nearly every application.
The most important features:
- 200 watt 100 Volt mixing amplifier
- 4 mic inputs (phantom via internal switch)
- Mic inputs have integrated speech filters and are high-class transistor balanced
- 4 Line inputs
- 4 Loudspeaker output zones can be selected (switch on/off) and have LED indication. Zone 4: selection of “Music only”, “microphone only” or both music and microphone.
- Bass-treble tone control
- Master volume control
- 3-Level priority system:
- 1. Emergency input: directly to the power amplifier (vol adjustable)
- 2. VOX Mute: Voice activated mute (adjustable) on MIC input 1 mutes all other inputs
- 3. Contact closure mutes all line inputs
- LED indication on front pannel when line inputs are muted
- 24V ouput power is activated via contact closure. Can be used to switch the 24V priority relays of volume controls.
- Integrated 2-tone chime has an adjustable volume and is activated by contact closure
- Build-in dynamic limiter (-3dB)
- Record output via RCA
- PRE AMP OUT - AMP IN makes it possible to insert an external signal processor or to add
- Input : MIC1 (Front / Rear) : Bal. 1/4”Jack / Bal combo XLR-Jack, DIN5 (1.5mV), Euroblock. 14V phantom power via internal switch
- Input : MIC2-3-4 : XLR3 balanced (1.5 mV). 14V phantom power via internal switch
- Input : Emergency input : Balanced Euroblock (1V)
- Input : AUX input : RCA cinch (500 mV)
- Input : CD input : RCA cinch (500 mV)
- Input : Tuner input : RCA cinch (300 mV)
- Input : LINE4 : RCA cinch (200 mV)
- Input : Power amp input : RCA cinch (300 mV)
- Output Power RMS : Rated : 200 watt
- Output Power RMS : Max : 240 watt
- Speaker output : Zone 1-3 : On-off switch
- Speaker output : Zone 4 : Paging on-off, Music on-off
- Output impedance : 50V (12.5Ohm) - 70V (24.5Ohm) - 100V (50Ohm) - 8Ohm
- Pre amp out : RCA cinch (1V)
- Record Out : RCA cinch mono (1V)
- Priority output power : 24V activated by priority contact closure
- Chime : 2-tone chime activated by contact closure on Euroblock or DIN5. Volume adjustable
- Priority system : Level 1: Emergency / Tel : Euroblock (200 mV), mutes all inputs
- Priority system : Level 2: VOX Mute : On MIC 1 (0.6 mV), mutes mic 2,3 & 4 and line inputs
- Level set by trimmer
- Priority system : Level 3: contact closure : Mutes all line inputs
- Limiter : Dynamic limiter -3dB (red LED when active)
- Frequency Range : 40 Hz - 25 kHz
- S/N Ratio : Amplifier : Better than 95 dB, 22 Hz - 22 kHz
- S/N Ratio : Line : Better than 80 dB, 22 Hz - 22 kHz
- S/N Ratio : Mic : Better than 65 dB, 22 Hz - 22 kHz
- Distortion : <0.3% @ -6 dB, 1 kHz
- Bass control : ± 10 dB, 100 Hz
- Treble control : ± 10 dB, 10 kHz
- Power supply : 230 / 115 V DC or 24V DC
- Dimensions (H x W x D) : 88 x 430 x 356 mm, 19” brackets included
- Weight : 12.1 Kg